Announcement

Collapse
No announcement yet.

Alan thoughts on the everlast plastic swivel with metal ball

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Alan thoughts on the everlast plastic swivel with metal ball

    Originally posted by toolboxdiver View Post
    I need the base with the everlast threads so I can screw in the metal ballhook swivel or the everlast chainlink swivel. Thanks if I could make one I would

    Actually, a Better goal is to use the metal ball & hook, which will work fine with a plastic base plate. I have several of those. You need the hex (allen) wrench to back out the set screw than take the hook shaft out of the metal ball. Put it back together inside the plastic ballhook housing (remove plastic ball and replace with metal ball) and it will work fine. I don't notice any difference in the "action" of a plastic base and metal ball vs any other ballhook arrangement. But that metal shank smacking the plastic housing is a whole lot less noisy than the metal base. you can see and hear the metal ball in the plastic base in this video.

    In my arrangement described above, you can just set the metal base plate with the internal threads off to the side. The threaded part will also work with an Everlast chainlink swivel.
    Last edited by Speedbag; 01-10-2009, 12:32 AM.
    Speed Bag

    Put a little Rhythm in YOUR workout!
    *attendee: Every SB gathering so far!
    The Quest Continues...
    Onward to SpeedB.A.G. X! Summer 2019

    THE 10th Year Reunion!

    sigpic

    The Art of the Bag
Working...
X