Lets see if this works.....Here is a photo of my i-box platform. There was some serious vibration (despite being hung on a cinderblock wall) at the front edge of the board, so while I was busy thinking up impossible solutions, my dad took a power saw to a 2 x 4 and cut a piece that we wedged between the top of the platform board and the ceiling beam/joist.
There is now ZERO vibration despite the fact that this 2 x 4 is not attached by anything but pressure.
It works great, but it looked like hell, so I took an old Ringside handwrap and wrapped it around the 2 x 4 to pretty it up a little.
Ta Da !!!
There is now ZERO vibration despite the fact that this 2 x 4 is not attached by anything but pressure.
It works great, but it looked like hell, so I took an old Ringside handwrap and wrapped it around the 2 x 4 to pretty it up a little.
Ta Da !!!
Comment