HELP NEEDED: who has an iBox from Balazs?

[Tim]

I need a close up pic of the mounting holes. How thick is the mounting surface where the bolts/screws go (To bolt it to the wall)? We'll have some i-Box units at SPEED B.A.G. 2010, I'm hoping to buy enough hardware before hand to hang them.

[paranday]

The rails are an inch thick -- top surface to wall. Is this what you want to know? In other words, they are 1" thick x 2" wide in a cross section.

[Tim]

The rails are an inch thick -- top surface to wall. Is this what you want to know? In other words, they are 1" thick x 2" wide in a cross section.

Thanks, yes, that's exactly what I needed.

[Speedbag]

Thanks, yes, that's exactly what I needed.

Sounds like 3-1/2 or 3-3/4 Lag screws or bolts to hold it. Maybe 4 inches depending on the wall.

[Tim]

Sounds like 3-1/2 or 3-3/4 Lag screws or bolts to hold it. Maybe 4 inches depending on the wall.

Yup. 3-1/2 inch bolts will work fine for the racks I've got. I've got enough hardware to hang 14 or 15 platforms at this point, which should cover us.

[operator3]

Yeah, I used the 3.5 for mine. Then I over tightened one and it broke off in the wall. Lol