Hey, just finished hangin my new set up...and its solid.
I mounted the flanges a little different for strength & for easier mounting...
the trade off was looks...it would of looked more polished with the flanges mounted on the bottom of the 2x4's...but with the size I opted for strength.
2'x4'x3/4'' birch plywood (two=1.5'' thick)
3/4'' black pipe & flanges
just under a 100$ on material (screws,glue,varnish)
If I ever come across some scrap 2'' butcher block counter top, I would do the same set up with brass.
I mounted the flanges a little different for strength & for easier mounting...
the trade off was looks...it would of looked more polished with the flanges mounted on the bottom of the 2x4's...but with the size I opted for strength.
2'x4'x3/4'' birch plywood (two=1.5'' thick)
3/4'' black pipe & flanges
just under a 100$ on material (screws,glue,varnish)
If I ever come across some scrap 2'' butcher block counter top, I would do the same set up with brass.
Comment