swivel hole pattern

[Speedbag]

thanks.. everlast spacing is 2" between adjacent holes and 2 7/8" distance bewteen opposing holes. You would think the hole spacing would be uniform for most makes. I will probably just drill new holes in the swivel rather than put several more holes in my platform.

Where there's a will, there's a way.

[gfe76]

thanks.. everlast spacing is 2" between adjacent holes and 2 7/8" distance bewteen opposing holes. You would think the hole spacing would be uniform for most makes. I will probably just drill new holes in the swivel rather than put several more holes in my platform.

[Dutchman]

Unfortunately this isn't the case. The hole spacing for Everlast is different than a Ringside, which is different from a Cleto Reyes, etc etc. If you switch from one make to another , you can either fill the existing holes with dowels and redrill, or just rotate the base enough to expose fresh wood. Sometimes one or two holes will line up and you just need to drill the remaining ones.

[gfe76]

Is the hole pattern and spacing for mounting holes the same for most swivels? I think all of everlast's are the same regardless of model.