Announcement

Collapse
No announcement yet.

Permanently attaching screw in swivel with superglue or loctite

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • JasonDMX2
    replied
    Blue loctite - tool removeable

    Red - extra torsion required

    Green - Heat and torsion required



    Blue loctite is the standard for most non-critial machine parts and automobile fasteners. It will lock the threads nicely, but is removeable with hand tools

    Permatex makes their own variety of this popular thread locker, available at your local hardware store or in the adhesives/paint isle at wal-mart.
    Last edited by JasonDMX2; 02-14-2008, 03:51 PM.

    Leave a comment:


  • Speedbag
    replied
    Originally posted by Tim View Post
    Then some loctite high strength



    Used that stuff once on a bolt I shouldn't have ... had to use a torch to heat it up and beat it loose with a chisel and hammer
    that's good to know. I've got a few plastic ballhooks I need to take apart.

    Leave a comment:


  • Tim
    replied
    Originally posted by Speedbag View Post
    Plumbers tape and then superglue?
    Then some loctite high strength



    Used that stuff once on a bolt I shouldn't have ... had to use a torch to heat it up and beat it loose with a chisel and hammer

    Leave a comment:


  • Speedbag
    replied
    Originally posted by Roc Stone View Post
    You may want to try using plumbers tape around the thread before screwing it in.
    Plumbers tape and then superglue?

    Leave a comment:


  • Roc Stone
    replied
    You may want to try using plumbers tape around the thread before screwing it in.

    Leave a comment:


  • toolboxdiver
    replied
    Originally posted by preluda97 View Post
    should i superglue the threads so its permanently on ?

    The problem with superglue is the swivel is not interchangable, I have 2 title swivels one for each speedbag then I just unscrew the medium bag and screw in the small bag I plan on adding a ex small and a large bags and swivels for each, then it makes it easy to change them out for the type of bag you want to hit. I don't do all the fancy combinations that some of the folks here do yet but I may make another platform with a ball hook swivel for that. Right now I do 3 rounds on the 6 X 9 bag then 3 rounds on the 7 X 10 bag.

    Leave a comment:


  • riqal
    replied
    yeah the superglue will do the trick. I used superglue one time and it worked just fine after that.

    Leave a comment:


  • preluda97
    replied
    should i superglue the threads so its permanently on ?

    Leave a comment:


  • toolboxdiver
    replied
    Originally posted by preluda97 View Post
    i need it to stay on, not slide, will the wd40 help stick

    Helping it move more freely will help it stay on, if it is stiff the vibration makes it work its way loose. Hope this helps

    Leave a comment:


  • preluda97
    replied
    i need it to stay on, not slide, will the wd40 help stick

    Leave a comment:


  • toolboxdiver
    replied
    Originally posted by preluda97 View Post
    My title pro lock swivel keeps unscrewing
    try spraying some WD-40 around the bearing from the bottom and put some grease around the top of the bearing and on the threads. See if that helps, I have a Title Pro Swivel and never had any problem with mine after doing that.

    Leave a comment:


  • Permanently attaching screw in swivel with superglue or loctite

    My title pro lock swivel keeps unscrewing
Working...
X