Why do bags lose air over time?
Collapse
X
-
i find that my title bag loses air, but not very fast. i might give it a pump or two every other week. i think title bags are plastic bladders if im not mistaken. if it isnt, it sure does feel like it is, because it is light!
-
-
Bag loses air
Ditto on bags losing air over time. I think temperature also effects the rate of loss.
I normally refrain from continuosly filling bags, for every time you stick in the needle, you risk damaging the air valve, or at least make a leaky valve worse.
Leave a comment:
-
-
Originally posted by rellik134 View PostSeems like mine does. I find myself putting one or two pumps in a week. Because im a newb, I wasn't sure if my fists were getting stronger and i was wanting it faster, or if it was losing air. But for the past 3 weeks, I would say I have been adding 2 pumps or so a week.
I'm glad to know it's not just me!
Leave a comment:
-
-
Originally posted by Chris M View PostI understand, but do you or anyone else have this problem or do all your bags never lose any air?
Leave a comment:
-
-
Seems like mine does. I find myself putting one or two pumps in a week. Because im a newb, I wasn't sure if my fists were getting stronger and i was wanting it faster, or if it was losing air. But for the past 3 weeks, I would say I have been adding 2 pumps or so a week.
Leave a comment:
-
-
Originally posted by Dutchman View PostThere is basically two reasons for this. One is that there is some leakage from the valve. By the nature of how it works and the material it is made from a little air will escape through it. The other pertains to natural rubber or latex bladders. This material is not 100% air tight, and air will escape eventually through it, The rate of deflation depends upon the quality of the rubber. Now the plastic bladders this is not as much of a problem, but they will also deflate via the valve. This is not taking into account any leakage caused by use. A bladder not fitted perfectly will develope pinholes over time. Overinflation may cause failure of the valve.
I understand, but do you or anyone else have this problem or do all your bags never lose any air?
Leave a comment:
-
-
There is basically two reasons for this. One is that there is some leakage from the valve. By the nature of how it works and the material it is made from a little air will escape through it. The other pertains to natural rubber or latex bladders. This material is not 100% air tight, and air will escape eventually through it, The rate of deflation depends upon the quality of the rubber. Now the plastic bladders this is not as much of a problem, but they will also deflate via the valve. This is not taking into account any leakage caused by use. A bladder not fitted perfectly will develope pinholes over time. Overinflation may cause failure of the valve.
Leave a comment:
-
-
Why do bags lose air over time?
I have about six bags of various sizes and manufacturers. I've noticed that none of them will hold air for more than a week or so. They don't go completely flat, but they all require a couple of pumps or so to bring them back up to the pressure that I prefer.
Does everyone else also notice this?Tags: None
-
Leave a comment: